NewtLink
← Project Index NewtLink

NewtLink

Talk to an Apple Newton from a modern PC — install packages, read soups, poke at the device — over serial, infrared, or the Einstein emulator. No Newton Connection Utilities required.

Exploring Started: Nov 2026 Updated: Nov 2026

Overview

Tired of misplacing your Apple serial cable every time you want to link to your Newton? This talks to an Apple Newton (MessagePad 2000/2100, eMate 300) from a modern PC — installing packages, reading soups, and poking at the device — without Newton Connection Utilities, over a serial cable, the Einstein emulator, or infrared. There is, of course, enormous demand for this: me, and my few still-working Newtons.

How It Works

It reimplements the pieces Newton Connection Utilities relied on — Newton Streamed Object Format (NSOF) encode/decode and the newtdock packet framing — and speaks them over several transports: a real serial cable (MNP at 38400), a raw-SIR infrared dongle on a serial port (an ACTiSYS IR-220L+, say), the Windows IrDA stack via a USB dongle, or TCP to the Einstein emulator’s serial emulation. On the Newton you open Dock, pick the matching connection type, and tap Connect. A CLI drives the rest:

newtlink --serial COM5 load Foo.pkg     # Newton serial cable, MNP at 38400
newtlink --sir COM7 info                 # raw-SIR infrared dongle
newtlink --irda info                     # Windows IrDA stack (USB dongle)
newtlink --tcp-listen 3679 info          # Einstein emulator

A Note on Scope

It works on Newton OS devices that can use IrDA. The 100 through 130 series talk in Sharp ASK, so this isn’t for those — but if you’re using this at all, you’re probably weird enough to own multiple Newtons, so beam something to your IrDA one and relay it to the older one over wires.

Current Status

Working across serial, infrared, and the Einstein emulator, with a test suite behind it.