Spin Art Stencil
← Project Index Spin Art Stencil Maker

Spin Art Stencil Maker

Turn a line drawing into a circular “mystery disk” stencil — pin it, rotate to the numbers, trace the matching line, and a hidden picture appears.

Exploring Started: Nov 2026 Updated: Nov 2026

Overview

This takes a line drawing and converts it into a circular stencil you can cut on a plotter or cutter — a paper “mystery disk” that slowly reveals a hidden picture as you turn it.

A stencil disk and the hidden picture it builds up as you trace.
A stencil disk and the hidden picture it builds up as you trace.

How the Stencil Works

The trick is that the drawing is cut apart and spread around the disk, so no single position ever shows the whole thing. You pin the stencil through its center so it spins freely over a blank disk underneath. Then you work through a set of marked rotation positions: turn the stencil to each numbered angle, and trace the one line that lines up at that setting onto the disk below. Each rotation lays down one more piece in exactly the right place; once you’ve traced them all and lift the stencil away, the full hidden picture is assembled on the disk.

The program does the hard part — working out how to slice the drawing and which angle each piece belongs at — so all you have to do is pin, turn to the number, and trace.

Current Status

Working: feed it a drawing, get a cuttable stencil plus a preview of the reveal.